Press Release
Rugged Battery Powered Wireless Level Sensor
Base Station with 4-to-20mA Current Loop output
2.4 GHz Frequency band High Power Radio Transceiver
Simple and reliable operation
May 2010 – The Deeter Group; a market leading international company in the design, development and manufacture of electronic sensors and control systems, announces the launch of its ground breaking Wireless Sensor System for industrial measurement and control.
At the center of the Deeter Wireless Sensor System is the simple-to-use Base Station designed to receive data from remote wireless devices such as the Deeter Liquid Vertical Sensor (LVCS-RF). The base station converts remote sensor input signals into industry standard process outputs. The Base Station acts as the coordinator for an IEEE 802.15.4 wireless sensor network. It operates on one of 16 radio frequency channels available in the 2.4GHz ISM band. The high power transceiver can achieve a range of greater than 1km, subject to local environmental factors. The internationally recognized IEEE 802.15.4 protocol allows several wireless sensor networks to share the same wireless spectrum without interference.
The Base Station provides four open-collector transistor outputs which may be used to drive external relays for pumps and alarms or Deeter’s Dual Level Controller. Continuous analog sensor data such as liquid level is output using a 4-to-20mA current-loop driver which enables interfacing with industrial process controllers or the Deeter Group’s range of Current Loop Indicators. A serial communications channel provides full-duplex RS232 and half-duplex RS485 transceivers allowing software to be developed for linking to PCs, data-loggers, PLCs or other proprietary equipment.
The Base Station has three internal push-button switches and a 2-line by 16-character LCD. The buttons are accessible with the lid removed and are used in conjunction with the display to select installation options during initial setup. Once the system has been installed it will continue to operate without any further need for user intervention. The Base Station is housed in a rugged ABS enclosure with an external antenna. It has cable glands for power input and signal outputs and is supplied with an external, wall mounted, universal AC input power supply.
Deeter is launching the wireless Base Station with the Liquid Vertical Continuous Sensor – Radio Frequency (LVCS-RF) wireless sensor. The LVCS-RF is designed to measure a continuous liquid level and transmit this information by radio to a Deeter Wireless Base Station at regular intervals. The device is battery powered and transmits wireless sensor data using the IEEE802.15.4 protocol operating in the 2.4GHz frequency band. The transmission range is up to 1Km in ideal line-of-sight conditions. The operating temperature range is -20 to +70ºC.
The LVCS-RF circuitry is housed in an IP65 rated die-cast Aluminium head with an external antenna. An optional 3m extension lead and bracket are available for mounting the antenna in a position more favorable to wireless communication should the need arise. The sensor circuit is fitted inside a Food Industry Standard 316L stainless steel tube attached to the head, with a 55mm magnetic ball-float. Standard sensing lengths are 250mm, 500mm, 750mm and 1m. Custom lengths and materials are available on request. The LVCS-RF is powered by a single 3.6V Lithium Thionyl Chloride battery with a life typically of 9 months (based on a transmission interval of 10 seconds and an uninterrupted wireless link to the base station).
Peter Whiteaker, Managing Director of The Deeter Group, comments;”Over the past 20 years the Deeter Group has justly earned its reputation as a supplier of quality products and services. The introduction of our new British designed and manufactured wireless sensor systems takes us into a new and growing market sector. Our wireless base station and LVCS-RF sensors can be integrated into our customers systems or we can provide a complete measurement package by simply adding a Deeter Current Loop Indicator”
The Deeter Group product range includes level sensors, industrial weighing equipment, reed and proximity switches, security switches, termination assemblies, litz and magnetic wire and solar power systems. For more information on the Deeter Group range of wireless sensing products call +44 (0)1494 566046 or visit www.deeter.co.uk
About Deeter Group:
The Deeter Group is a privately owned group of companies first established in the UK in 1982 and set up to provide electronic services and products to industry. The Group comprises Deeter Engineering Services Ltd, Deeter Weighing Systems, Deeter Electronics Ltd, Deeter Electronics Inc and Deeter International Ltd. During its existence it has developed from a small local supplier to a Group of companies which trade throughout the world. Deeter now lists among its customers many large international companies and has justly earned its reputation as a supplier of quality products and services.
Deeter Electronics was established in 1991 as a distributor of specialist electronic products. Deeter Electronics now designs and manufactures sensor and wireless products in the UK and is a distributor for a number of market leading component Brands. Deeter provides a wide range of instrumentation products to customers in the UK, mainland Europe and the USA.
Contact:
The Deeter Electronics Ltd.
Deeter House
Valley Road
Hughenden Valley
HP14 4LW
T: +44 (0)1494 566046
F: +44 (0)1494 563961
| |
 |
